Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Silver Snowflake Cookie Tin
Level: Moderate

Materials
DAZZLE-TAC JEWELRY GLUE
ZIP DRY PAPER GLUE
LIQUID LAMINATE

4” X 6” metal tin (any color)
Silver metallic spray paint for tin
Blue spray paint for tin
Paper clay or any air dry clay
2” snowflake cookie cutter
Blue and silver metallic craft papers
Holographic glitter
Assorted silver, white & blue tiny beads
Small craft brush, ruler, pencil, paper cutter or scissors, Lucite roller or old rolling pin, toothpick

Silver Snowflake Cookie Tin
Instructions:
1. Take can outside in a cardboard box and spray the lid using the blue metallic spray paint. Let dry and apply a second coat to cover completely. Remove from box.
2. Using the same box, spray the bottom of the tin with the silver paint. Once dry, repeat to cover completely.
3. Cut a strip of blue metallic paper 1” wide and about 5” long. Make sure the paper meets the lid and does not fit under it. Glue strip to tin with ZIP DRY PAPER GLUE. Repeat process on the other three sides and let dry.
4. Cut a 3 ½” square of silver metallic paper for the lid. Glue to lid top with ZIP DRY PAPER GLUE.  Let dry.
5. Roll paper clay to 1/8” thickness. Cut out five snowflakes and let dry at least 3 hours depending upon the humidity in your area.
6. Paint both sides of the wooden star with 2 coats of gold paint, drying between coats. Draw lines around the edges of the star with the black marker.
7. Glue one snowflake to the lid with DAZZLE-TAC and the other four onto the blue strips on the side. Hold in place for a few minutes to allow glue time to grab onto surface.
8. Add a thin line of DAZZLE-TAC around the perimeter of the silver paper on the lid, one side at a time. Use a toothpick to move the tiny beads onto the glue. Repeat process on sides of can over the edges of the blue strips as shown. Let one side dry before finishing remaining sides.
Designer: Sandy Rollinger
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405
E-mail: Crafts4@BeaconAdhesives.com

Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.