Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Daisy Key HolderDaisy Key Holder
Level: Easy

Materials:
ZIP-DRY PAPER GLUE

Wood key holder approximately 6” x 7”
Daisy flower punch
Decorative edge scissors
Alphabet letters
Green sage paint
Tan cardstock
Green & white polkadot cardstock
Gold flat back pearl
Dark green decorative paper
Ruler, pencil, scissors, saw tooth hanger (optional)

Instructions:
1. Paint outside of key holder using sage paint and brush. Let dry and then add another coat for complete coverage.
2. Place top part of key holder on back of the polkadot cardstock and trace around the top edge with a pencil onto a piece of paper. Using this as a pattern, cut out the polkadot cardstock just a bit smaller. Glue to the front of the key holder with ZIP DRY as in the photo.
3. Measure and cut more of the polkadot paper to cover the side, top, and back of the key holder and glue in place. Measure and cut another piece to fit inside the holder and glue down.
4. Cut an oval about 1 ½” X 2” with the decorative scissors from the darker green paper and glue above the door.
5. Punch out two daisies from the tan cardstock. Glue one on top of the other and then onto the green oval. Glue the pearl to the daisy’s center.
6. Add the word KEYS to the top of the door. Add a hanger on the back if desired.
Designer: Sandy Rollinger
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405
E-mail: Crafts4@BeaconAdhesives.com

Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.