Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Butterfly Message HolderButterfly Message Holder
Level: Easy

Materials
ZIP DRY PAPER GLUE

9” X 12” cork message board with frame at least 3⁄4” or wider, your choice.
White or blue craft foam
Blue & purple card stock
Baby blue rickrack
Blue or purple plaid decorative paper, or of your choice
Medium butterfly paper punch
Decorative scissors, thumb tacks, paper crimper, paper cutter, ruler,thumb tacks

Instructions:
1. If necessary, widen sides of corkboard to 1 ¾” by cutting a 1” wide strip of craft foam and glue strips to inside frame edges.
2. Cut strips of plaid paper 1 4/3” wide to fit around the frame. Glue in place with ZIP DRY, covering frame edge.
3. Glue blue rickrack around paper edges as in photo.
4. Punch out four butterflies from the blue card stock for the frame and six purple ones, running all through the paper crimper. Glue butterflies as seen in photo.
5. Cut out four 1 ½” squares of purple card stock and run through the paper crimper. Cut edges using the decorative scissors and glue one square to each corner of the frame.
6. Cut four 1 ½” square of blue card stock and punch our a butterfly shape from the centers. Run through the crimper and then glue squares over the blue corners at an angle as in photo.
7. Cut out as many butterflies as needed for thumb tacks and run through the crimper. Glue butterflies to the top of the thumb tacks.

Designer: Sandy Rollinger
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405
E-mail: Crafts4@BeaconAdhesives.com

Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.