By Lisa Kettell
Need to still finish the Christmas Tree? Here’s a fast last minute ornament project; DIY Glitter It Bulbs. Just grab some Beacon Adhesives Glitter It, Glitter, and Clear Bulbs. Then scroll down and make some of your own.
For the plain glitter bulbs you will need:
- Beacon Adhesives Glitter It
- Variety of Glitter
- Clear Flat or Round Bulbs
Step 1: Remove the bulb cap from the ornament.
Step 2: Pour the Glitter it into the bulb, about half full.
Step 3: Start swirling the glitter it around in the bulb. Tilting and twisting until you coat the whole inside of the bulb.
Step 4: Pour out the excess glitter back into the glitter it container. Repeat the above steps for each bulb.
Step 5: Turn the glitter it coated bulb(s) upside down in a plastic cup to drain any excess glitter it out and to dry for about 5-10 minutes.
Step 6: Now the fun. Start pouring glitter into the bulbs.
Step 7: Shake the glitter around in the bulb. Pour out any excess glitter over paper.
Step 8: If you miss any spots with glitter. Apply more glitter it to the inside of the bulb, let dry and add more glitter.
Now your dazzling ornaments are ready for the tree. Try a blend of colors and styles. Add some bakery twine or glittery ribbon to the ornament caps. Even paint those caps. So many possibilities.
Click here for the full version of these ornaments using stickers, paint and Beacon Adhesives Fast Finish Decoupage!
See you soon,