 |
 DECOUPAGE GLOSS SEALER |
|
ADDS A PROTECTIVE FINISH TO ALL DECOUPAGED SURFACES |
 |
| • |
Easy to use spray top for preciseapplication on all decoupaged surfaces. Works with any decoupage medium to add extra shine. |
| • |
Provides a gloss protective coating without harmful aerosol fumes or concerns about environmental issues. |
| • |
Acid-free, dries crystal clear to a tack free finish. Non-toxic and even waterproof for permanent results. |
| • |
Avoid shaking the bottle before spraying as this will prevent bubbling. |
| • |
Spray bottle straight down and not on a vertical surface to avoid running. Hold bottle 6” away from item to be sprayed. |
|
|
HELPFUL HINTS |
| • |
Don’t use varnished furniture or counters as a work surface as liquid may damage finish. Always cover work areas with plastic or several layers of newspaper to protect surfaces. |
| • |
Depending upon material to be sprayed, dry time is approximately 1-3 hours. |
| • |
Store sprayed items flat until sealer has completely dried to avoid streaks. |
| • |
Use DECOUPAGE GLOSS SEALER to seal color copies before decoupage process. To coat copies, hold bottle further away than 6” and spray very lightly. Allow to dry before moving. |
| • |
After each use, rinse spray top under hot water to prevent product from drying in the nozzle. Spray is a very fine mist so cleaning between uses is important to extend the life of the sprayer. |
|
|
CUSTOMER SERVICE: Signature Crafts, 1-800-865-7238 |
All of Beacon's glues are proudly made in America.
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405
E-mail: Crafts4@BeaconAdhesives.com
Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.
|
