Beacon Adhesives Craft HavenBeacon Adhesives

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

IMAGE OF FOAM-TAC GLUE

See Foam-Tac Demos
on YouTube
Demo 1, Demo 2

For further information, please contact Pete
at (914) 664-0184 or at pete@beaconadhesives.com

model airplane

FOAM-TAC
SUPERIOR GLUE FOR SPECIAL FOAMS
GREAT FOR REMOTE CONTROLLED PLANES!

SUPERIOR GLUE FOR BONDING SPECIAL FOAMS Beacon Adhesives
Foam-safe glue bonds Depron, EPS, EPP, XPS, EPO, and many other types of foam as well as carbon fiber and wood.
Excellent for building or repairing RC planes.
Does not attack, melt or dissolve foams but holds quickly and cleanly.
Remains flexible and clear once dry, never brittle. Super strong bond is like welding the foam together.
Requires much less glue for a permanent bond than a cyanoacrylate- based glue. Won’t glue fingers together.
HELPFUL HINTS
ALWAYS test on scrap materials first to ensure compatibility.
Surfaces must be clean, dry, and free of dust and grease.
Spread glue evenly on both sides of material to be bonded.
Allow surfaces to air dry for 10-20 minutes depending upon size of area being glued.
Press surfaces firmly together.
Maximum bond is achieved within 24 hours or less.
Always replace the flat white cap after each use to prevent product evaporation.
Do not use near any open flame or ignition source. Avoid  prolonged breather of vapors. Keep out of reach of children.

TESTIMONIAL
I have used Foam-Tac to repair a broken aileron and it worked beautifully. The aileron came off cleanly at the hinge point after a bad crash, and I used Foam-Tac to glue the aileron back onto the wing! This foam-safe glue is super strong, yet stays pliable, and you would never know that the aileron had ever been broken off! The jet still looks new and there was no need to mar up the finish with any hinge tape or fasteners.
Bill, Filadelfos RC

For further information, please contact Pete at (914) 664-0184 or at pete@beaconadhesives.com
All of Beacon's glues are proudly made in America.
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405

Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.