Patch Attach

In Stock

A quick attach for any patch. Patch Attach is the only truly dry cleanable glue for patches.

Additional Information

Available in

1oz bottle, 1 Dozen

Materials It Bonds

Backpacks, Hats, Patches (Best on patches with exposed fabric back), To: Fabrics

Features

Permanent, Dries Clear, Non-Toxic, Washable, Water proof, Dry Cleanable, UVA Resistant

To Increase Product Effectiveness:
Apply Patch Attach along the edge of the entire patch back.
Position patch on garment. Cover with press cloth to avoid scorching.

To Thin:

To Remove:
Patch Attach can be washed off with water before ironing, even if it’s dry
Patches can be removed from garments by re-heating the patch from the back with an iron on cotton setting for 15-30 seconds. Use press cloth
Use press cloth
Once ironed, there is no way to remove the glue from the fabric.

"PATCH TYPES:
Patch backs come in different forms: plain fabric, plastic coated with an exposed embroidered edge, and a completely coated plastic back with no exposed embroidery."
Patch backs come in different forms: plain fabric, plastic coated with an exposed embroidered edge, and a completely coated plastic back with no exposed embroidery.

DIRECTIONS:
PLEASE SAVE FOR FUTURE REFERENCE
Test on scrap fabrics first. See Helpful Hints for fabric information.
Patches with Exposed Fabric:
1.   If possible, pre-wash fabric or garment to remove sizing.
2.   Apply Patch Attach along the edge of the entire patch back.
3.   Let glue dry for 10 minutes.
4.   Position patch on garment. Cover with press cloth to avoid scorching.
5.   Press with dry iron on cotton setting  (no steam) for 60 seconds.
6.   If possible, iron on reverse side for an additional 30 seconds.
"• Patches with Plastic Backs and No Exposed Fabric
Patch backs that are completely covered in plastic must use directions listed below."
1.   With a sharp knife or razor, score the plastic backing to expose fibers underneath at the patch edge around the entire patch. Be careful not to cut through the patch!
2.   If possible, pre-wash fabric or garment to remove sizing.
3.   Apply Patch Attach along the edge of the entire patch back.
4.   Let glue dry for 10 minutes.
5.   Position patch on garment. Cover with press cloth to avoid scorching.
6.   Press with dry iron on cotton setting  (no steam) for 60 seconds.
7.   If possible, iron on reverse side for an additional 30 seconds.

btt